Current situation analysis and market outlook of t

2022-08-14
  • Detail

Current situation analysis and market outlook of polypropylene powder

current situation analysis and market outlook of polypropylene powder

January 18, 2019

1. Current situation analysis of polypropylene powder

according to monitoring, at present, the overall capacity of polypropylene powder in China is about 5.533 million tons, of which the annual installed capacity in North China is reduced by 60000 tons; The annual production capacity of devices in Shandong Province is reduced by 70000 tons; The annual capacity of units in East China is reduced by 290000 tons of advanced composite materials. Nanjing Jinling Plastic Co., Ltd. in East China plans to increase production by 100000 tons this year, and the total annual production capacity will increase to 250000 tons. During the year, there were many powder enterprises that stopped production. In addition, due to maintenance and reduced load production, it was difficult for the domestic powder output to form a direct proportion to the total annual production capacity of Chinese coatings. It is observed that the scale of polypropylene powder manufacturers is generally small, and about 70% of the enterprises have a production capacity of about 10000 tons. Shandong powder enterprises are relatively concentrated and play a decisive role in the domestic powder industry. Their structure is divided into two parts according to the source of raw materials. One is self supplied propylene, which has obvious cost advantages and competitive advantages, such as Dongming, HengYuan, etc; The other is the outward mining of propylene. Such enterprises have relatively high production pressure, limited by raw materials and poor competitiveness, such as nuohong, Guangqing, Kairi, etc. There are nearly 100 powder production enterprises in China, but the operating rate has decreased year by year in recent years. As shown in the figure, the average operating rate this year is only about 50%. In recent years, due to the impact of strict environmental protection inspection and the rising price of propylene, the cost of powder has been upside down. In order to meet the market and seek a way out, most enterprise installations have begun to stop production and change production one after another; In addition, most of the powder enterprises are mainly outsourcing propylene, competing to meet jb/t8521.1 (2) 007 woven sling safety Part 1: 1 general purpose synthetic fiber flat sling and JBT 8521.2 (2) 007 woven sling safety Part 2: 1 general purpose synthetic fiber round sling mechanical testing requirements compete for advantages, coupled with a large number of coal polypropylene pellets also entering the market, the market resource volume increases. With the continuous progress of chemical technology, the quality of coal polypropylene is almost the same as that of petroleum products, and the price is close to that of powder, which has a significant impact on the market. Multiple factors have led to the decline of the share of powder in the market, and the prospect is worrying

2. Market outlook of polypropylene powder

although the powder is facing many hardships at present, it is not without room for development. Although polypropylene powder is relatively brittle and easy to age, it is easy to mix when used, and its processing performance is also good. Granular materials cannot directly replace powder materials. Secondly, some customers will choose powder materials in consideration of their own overall benefits. In addition, powder can clear the value displayed in the figure. The scale of material production device is smaller than granular materials, its process adjustment is flexible, and its melting range is wide. At the same time, the popularity of cruise ships and ferries is also increasing, The requirements of customers can be adjusted in time. Therefore, we should treat the advantages and disadvantages of powder correctly and dialectically. With the gradual reduction of the price difference of powder particles, this is both an opportunity and a challenge for polypropylene powder enterprises. As long as the production is reasonably adjusted according to the market demand, we can seek better development

Copyright © 2011 JIN SHI