How to lay the wall cloth

  • Detail

The wall cloth can decorate our home richly and warmly, and different wall cloth shows different characteristics. The wall cloth looks good, but it is not easy to paste it. But it's much easier to understand the pasting skills. Today, let's talk about how to lay wallpaper and wallpaper. 1、 Preparations before wall covering

the wall surface to be covered with wall covering shall be flat and dry, free of dirt and floating dust, and the color of the wall surface shall be uniform. Paint peeling, cracks or uneven dirt will inevitably appear on the painted wall after several years of use, and too thick paint layer will affect the wall to absorb the wall cloth glue, so that the wall cloth can not be well pasted on the wall, so the original wall skin needs to be removed and the necessary wall treatment should be carried out before the wall cloth is paved. 2、 Glue on the wall

apply a layer of glue on the wall first, which can prevent the wall from absorbing adhesive and making the wall cloth not stick firmly, and also make the wall become slippery, which is convenient for sliding the wall cloth to the correct position. Apply the slurry evenly on the whole wall with a brush coated with adhesive. If the slurry is stained on the painted wood components, it should be wiped off immediately with a wet cloth or sponge, otherwise it will be difficult to remove as soon as it solidifies. (special note: glue is painted on the wall, not on the wall cloth. The wall cloth cannot be stained with water or glued.)

third, stick the wall cloth

after brushing the glue, you can mount the wall cloth. The extra wide wall is mounted horizontally. Starting from the inner corner, after fixing the exact position of the wall cloth, align the pattern with infrared ray and perpendicular to the ground. After the cloth edge is fixed on the wall, it can be paved step by step. At the same time, pay attention to the flatness and fastness

step 1: use an infrared flower counter to make the wall cloth perpendicular to the ground and fix it in an accurate position. If the fixing is not allowed, the cloth surface will wrinkle and the pasting will be uneven

step 2: unfold the wall cloth vertically for about 2 meters, but don't press it down quickly. The vertical part must be fixed. First, smooth it evenly along the vertical direction, and then gradually smooth and scrape it in the direction of pasting. At the same time, pay attention to scraping it continuously in the same direction, evenly pick out the air, and ensure that it is not wrinkled and paved slowly. (try to avoid sticking it in the wrong position, pulling away the wall cloth and paving it repeatedly, which will lead to wrinkle of the wall cloth)

step 3: scrape and compact while paving. This link is very important. Be sure to scrape and brush all cotton twice in sequence until there are no bubbles. 4、 After the construction is completed

after the construction is completed, wipe off the excess glue with a wet towel, and then carefully check whether there are bubbles again. If there are bubbles, deflate with a needle, or inject glue with a needle and scrape it flat. Pull out the doors, windows and sockets, and press the wall cloth of the inner corner from top to bottom with an inner corner pressing wheel as soon as possible. Scrape the junction of the wall and the ceiling and floor line, and then use a art knife to neatly cut off the excess corners

v. maintenance matters:

1. During construction and within 2 days after construction, please close the doors and windows and do not breathe. Let the wall cloth dry naturally, otherwise it is easy to crack

2. You can use a vacuum cleaner or wet towel to clean regularly. If there is oil or dirt, you can use detergent to clean it, and then wipe it dry




Copyright © 2011 JIN SHI